Sfp 1024 Manual

Notifier sfp 1024 Ph 2 Trouble. Notifier AM200 manual. SFP breakout to another SFP. Notifier AFP400. Notifier software. Notifier 5000 Queston. 2 SFP-5UD & SFP-10UD Series Manual— P/N 52879:C2 1/24/2012 Fire Alarm System Limitations While a fire alarm system may lower insurance rates, it is not a substitute for fire insurance! An automatic fire alarm system—typically made up of smoke detectors, heat detectors, manual pull stations, audible.

Sfp-1024 Installation Manual

Conventional Fire Alarm Control Panels and Communications

Multiple Zone Coverage (2 to 120 Zones)

Conventional fire alarm panels available from 2 to 120 zones
Control communicators from 3 to 4 inputs or optional UDACT plug-in for other systems
Field Charging Power Supply (FCPS) available for powering ADA/UL1971 devices
Optional slave voice evacuation panel —Model VEC-25/50
Standard LED or 7-segment displays
Releasing controls for deluge and agent release

411 Series Communicators

NOTIFIER offers a range of Digital Alarm Communicator/Transmitters, designed to transmit system status by point or zone, providing valuable information to a central station or service personnel.

Universal Digital Alarm Communicator

The compact, simple-to-use UDACT works with a variety of NOTIFIER's fire alarm control panels. The UDACT is designed to transmit system status by point or zone, providing specific information regarding the fire location to the fire department. The UDACT communicates to UL-listed central station receivers via the public switched telephone network.

Fire•Watch 411 Series

The Fire•Watch 411 Series from NOTIFIER are compact, multifaceted, slave Digital Alarm Communicator Transmitters (DACTs) designed for a variety of fire, security, and non-fire applications.

411 and 411UD

The series consists of two models: the 411 and 411UD, providing three and four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require an existing (or new) Fire Alarm Control Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance. Due to extremely flexible programming options, the 411 Series slave DACTs are also ideal for monitoring non-fire and security control panels. With fifteen selectable transmission formats, including ADEMCO Contact ID, compatibility with virtually all Digital Alarm Communicator Receivers (DACR) is ensured. Programming can be accomplished on-site with a hand-held programmer (PRO-411), or remotely (411UD only) utilizing an optional PK-411UD Windows^®- based remote upload/download software package. The PK-411UD upload/download software also permits system interrogation and revision from a remote site.

411UDAC

The Fire•Watch 411UDAC is a compact, multifaceted, stand-alone or slave Fire Alarm Communicator designed for a variety of fire and non-fire applications. It provides four channels (inputs) that accept waterflow devices, two and four-wire smoke detectors, pull stations and other normally-open contact devices.

The 411UDAC is a cost-effective solution for applications that require an existing (or new) Fire Alarm Control or Security Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance. Due to its extremely flexible programming options, the 411UDAC is also ideal for use as a stand-alone unit to monitor: sprinkler systems for waterflow and supervisory conditions; processes (i.e. water level, gas detection, loss of air flow); and normally-open contact devices. With fifteen selectable transmission formats, including ADEMCO Contact ID, compatibility with virtually all Digital Alarm Communicator Receivers (DACR) is ensured. Programming can be accomplished on-site with a hand held programmer (PRO-411) or remotely utilizing an optional PK-411UD Windows^® based remote upload/download software package. The PK-411UD upload/download software also permits system interrogation and revision from a remote site.

Series Features

Three models available:

411 – Slave Communicator
411UD –Slave Communicator with up/download
411UDAC – Stand-alone Communicator with up/download

Up to four input channels (3 on the 411)
Fully programmable with PRO-411 or with Windows^® utility (up/download models)

SFP-2402/SFP-2404

Small Conventional Panels: 2- and 4-zones

SFP-2402 and SFP-2404 Fire Alarm Control Panels (FACPs) bring the latest in microprocessor technology to conventional fire controls. Both models are compatible with the new I3™ smoke detectors from System Sensor, and provide advanced features such as drift compensation, maintenance alert, and freeze warning.

Automatic synchronization of audio/visual devices is provided, with three selections available for manufacturer protocols. The Notification Appliance Circuit (NAC) protocol includes the ability to silence audible devices while strobes continue to flash, utilizing just a single pair of wires.

The SFP-2402 and SFP-2404 are also compatible with conventional input devices such as two- and four-wire smoke detectors, pull stations, waterflow devices, tamper switches, and other normally-open contact devices.

SFP-2402, 2-Zone Features

Two Class B Initiating Device Circuits (Zones)
Two Class B Notification Appliance Circuits, 3.0 Amps and programmable strobe synchronization
I3™ Ready–conventional detection with drift compensation and maintenance alert
Form-C Alarm and Trouble relays

Notifier Sfp 1024 User Manual

SFP-2404, 4-Zone Features

Four Class B Initiating Device Circuits (Zones) with Class A option module
Two class B Notification Appliance Circuits, 6.0 amps, with Class A option and programmable strobe synchronization
I3™ Ready – conventional fire detection with drift compensation and maintenance alert
Form-C Alarm, Trouble and Supervisory relays

RP Series Releasing Controls

Small Releasing Panels: 4-zones

RP1001/RP1002 NOTIFIER offers two small releasing systems. The RP1001 and RP1002 both include 4 initiating zones and 4 notification circuits. The difference between the two models is that the RP1001 is designed for pre-action/deluge and the RP1002 is designed for agent release.

Features

Two models –RP1001 for pre-action deluge, RP1002 for agent release
Four zones –cross, abort and manual release
Four Notification Appliance Circuits –2 for release, 2 for warning

SFP-1024 10-Zone Control Communicator

The SFP-1024 Fire Alarm Control Panel is a 24-volt, 10-zone fire alarm control panel with a built-in communicator and remote site upload/download capability. The integral communicator transmits event information (alarms, troubles, supervisories, faults, etc.) to a UL listed central station.

Selectable transmission formats allow the SFP-1024 to communicate to virtually all central stations.

Features

10 Class B zones (Class A with option module)
Built-in digital communicator
2 Notification Appliance Circuits, expandable to 4 (6.0 amps)

System 500 Fire Alarm Control Panels

Medium Conventional Panels: 4 to 16 zones

System 500 The NOTIFIER System 500 fire alarm control panel is a medium-size unit designed for maximum flexibility and ease of installation. The center of the system is the Central Processor Unit module which monitors and controls one or two additional user-selected modules.

The System 500 may be configured as a 4, 8, 12, or 16-zone system. In addition, up to eight control points may be added, creating a maximum capacity of 48 points (16 zones and 12 output circuits).

Features

Up to 120 circuits (zones)on the System 5000 and 16 on the System 500 (Class A or B)
Standard LED or optional 80-character LCD back-lit display
100% field programmable with multiple passwords and non-volatile memory
Releasing option with time delays, abort and manual release

System 5000 Fire Alarm Control Panels

Large Conventional Panels: Up to 120-zones

Sfp-1024 Programming Manual

System 5000 The NOTIFIER System 5000 fire alarm control panel is a multi-zone unit designed for maximum flexibility and ease of installation. The microprocessor control and modular construction enables users to configure the system to meet their precise requirements. Field programmability simplifies initial installation and allows quick updates to meet future needs.

Sfp 1024 User Manual

Up to 120 Style B or Style D (Class B or A) alarm initiating circuits are supported. By adding a Voice Command Center and Voice Control Modules to the System 5000, this system can be used in large multi-zone buildings to provide a reliable and cost-effective life safety system.

Features

Up to 120 circuits (zones) on the System 5000 and 16 on the System 500 (Class A or B)
Standard LED or optional 80-character LCD back-lit display
100% field programmable with multiple passwords and non-volatile memory
Releasing option with time delays, abort and manual release